Arctic Titanium Heat Pump for Swimming Pools and Spas - Heats & Chills - 19,200 BTU

SKU: N-451
C$ 1,875
12 In Stock

Pool Heat Pump 025ZB Heats/Cools Air to Water Heat pump for pools, hot tubs and spas

Requires SIN or Tax ID for shipping to USA

air to water heat pump

025ZB Heat/Chill Heat Pump

Chiller and Heater in one unit

While hot tub users most often reference the heating requirements, the Arctic Heat Pump is also a chiller if need. That’s right.....It can heat and cool based on a simple controller selection. Ideal for hot climates that need a retreat from the hot summer heat! A cold water plunge is a must for Sauna owners. Now you can quickly change your hot tub to a cold plunge tub! Cold water therapy has many health benefits and is growing in popularity in North America as we discover what the Nordic Culture has practice for centuries.

Excessively hot swimming pools cause problems with the chemical imbalance and can quickly become full of algae if not properly monitored. Chlorine gases and evaporates as the water temperature rises. In areas such as California, Texas, Arizona and Florida, the hot summer temperatures can be difficult for pool owners. The Arctic Pool & Spa Heat Pumps allows owners to reduce the temperatures back down to proper levels. By Chilling your pool you can get reprieve from hot summer heat waves, when the temperature drops, the Arctic Heat Pump will switch back to heating mode.

Php 2

Heating & Cooling

Arctic 025ZB Heat Pumps works down to 20 F (-7C). This air to water heat source is the most efficient cold weather heat pump on the market. Heats and cools with over 80% savings of traditional heating equipment. This unit is cable of producing up to 5.6 Kw or 19,200 BTU of heat energy. No other pool or spa heat pump on the market will outperform the Arctic 025ZB in colder weather. This allows you to open your pool earlier and close it later. It is also ideal for energy saving for spas and hot tubs. Working up to 104 F even in 20 F conditions! The Arctic 025ZB is a great heat pump for any hot tub or Spa.

  • Cold Weather Heat Pump Technology 20 F (-7 C)
  • Titanium Heat Exchanger
  • Heats and cools automatically
  • Heat Pump for hot tubs, spas and smaller pools or swim spas
  • Easy to install with no refrigeration mechanic needed
  • Digital controller included
  • Vibration pads included
  • Drain pan and compressor low temp protection
  • Hot gas defrost
  • Drain Pan Freeze Protection for cold weather
  • Low noise fan
  • ETL certified for installation in North America

Php 3


  • 1.5" water connections
  • Max Amps 10.1
  • 220-240 VAC
  • Output 5.6 Kw (19,200 BTU)
  • Weight 117 LBS (53 Kg)
  • Flow rate 7 GPM (pool pump sold separately)
  • 37" long x 14.5" wide x 22" tall
  • 1 year parts warranty - 2 year compressor warranty (Extended Warranty Available)

Php 4

How it works - The Arctic Heat Pump harness the energy found in the air. By using an oversized evaporator the energy is removed and transferred to the refrigeration. A compressor compresses the gas causing its temperature to increase. The hot gas then passes through a titanium pool heat exchanger where it is transferred directly to the pool or spa water. In cooling mode the unit reverses direction and chills the pool water by removing the heat from the titanium heat exchanger and discharging it out the evaporator.

The unit consumes only 1/3 to 1/5 of the electricity that it produces resulting is energy savings as high as 80% compared to traditional electric or gas pool or spa heaters. Built in hot gas defrost and drain pan/compressor freeze protection for cold weather performance.

Example Layout - Pool or Spa Heat Pump

Php 5

Dimension (L x W x H) 37 x 14.5 x 22 Inch
Weight 120 Pound

Our Products

Contact Us

#835 Kapelus Dr. West St Paul, MB R4A 5A4, Canada

Recent Blogs