The Zone Valve combines the proven performance of a synchronous motor technology with “enhanced motion” gear action which reduces motor wear while providing smooth, quiet (no water hammer), and constant close off. The crafted brass forged body is rated at 300 psi, and the high temperature paddle design assures years of trouble free operation. Precision formed components and an exclusive spring calibration process ensure uniform spring return and long valve life.
Belimo 3 way Valve- Automatic Diverter Valve - 1" NPT 240VAC
Features:
- Compact in design, fits inside fin tube casing and fan coils
- Wide service range, rated from 32°F to 212°F medium with up to a 50% glycol mix
- Up to 75 psi DP close off
This valve is typically used on fan coil units, baseboards or other hydronic applications where fail safe operation on 2-wire control is required. This valve is suitable for use in a hydronic system with variable or constant flow. This valve is designed to fit in compact areas where on/off or control is required using 24 VAC or 120 VAC
Actuator Technical Data
Specifications
Electrical data Nominal voltage: AC 230 V
Nominal voltage frequency: 50/60 Hz
Power consumption in operation: 6.5 W
Transformer sizing: 7 VA (class 2 power source)
Auxiliary switch: 1 x SPST, 5 A resistive (5 A inductive) @ AC 230 V
Switching capacity auxiliary switch: 5 A resistive (5 A inductive) @ AC 230 V
Electrical Connection: 6" wire leads
Functional data
Manual override: hand lever
Angle of rotation: 90°
Angle of rotation note: 90°
Running time fail-safe: <5 s Variable: 2.5...10 s
Running time fail-safe note: Variable: 2.5...10 s
Noise level, motor: 35 dB(A)
Noise level, fail-safe: 35 dB(A)
Position indication: Mechanically (integrated)
Safety data
Degree of protection IEC/EN: IP20
Degree of protection NEMA/UL: NEMA 1
Enclosure: UL Enclosure Type 1
Agency Listing: CE, cULus
Quality Standard: ISO 9001
Ambient temperature: 32...104°F [0...40°C]
Storage temperature: -40...176°F [-40...80°C]
Ambient humidity max. 95% r.H., non-condensing
Servicing: maintenance-free
Weight
Weight: 0.88 lb [0.40 kg]
Valve Technical Data
Functional data
Valve Size: 1" [25]
Fluid: chilled or hot water, up to 50% glycol
Fluid Temp Range (water): 32...212°F [0...100°C]
Body Pressure Rating: 300 psi
Close-off pressure: ps 20 psi
Flow characteristic: on/off, diverting
Flow Pattern: 3-way
Leakage rate: ANSI Class III 0.1%
Cv: 8
Body pressure rating note: 300 psi
Materials
Valve body: forged brass
Housing seal: EPDM
Seat: EPDM
Pipe connection: NPT female ends
Dimensions
WARRANTY - 2 YEARSmanufacturer's warranty
Dimension (L x W x H) | 12 x 12 x 12 Inch |
Weight | 5 Pound |