RESOL Solar Pump Station FlowSol S BS+

Single Line Station FLowSol S with pre-wired Resol DeltaSol BS PLUS Full Kits, 3/4" NPT

The FlowSol® S pump station is a single-line pump station and is used in the solar return. The station is available with a choice of controllers from the popular DeltaSol® BS series. The pump station is pre-assembled and contains all the vital hydraulic components for operating a solar thermal system and is particularly easy to install.

Single-line pump station, incl. controller DeltaSol® BS Plus and 4 sensors Pt1000 (2 x FKP6, 2 x FRP6)

• Safety assembly with connection for the diaphragm-type expansion vessel, safety valve and pressure gauge

• Fill and drain valves

• Wall mounting bracket with fastening material

• Insulated design casing

• Especially suited for the pump station: Resol accessories such as the ALS15 discharge hose, the SBS 2000 filling and flushing station, etc.

• Circulation pump: Wilo Star ST15/6 ECO (Nominal output: 49 W)
• Wilo Star ST15/7 ECO (Nominal output: 53 W) – surcharge
• Safety valve: max. 6 bar
• Pressure gauge: 0 ... 10 bar
• Flowmeter: 1 ... 10 l/min
• Non-return valves: 200 mm head, openable
• Connection to diaphragm-type expansion vessel: 3/4'' IT, flat sealing
• Outlet safety valve: 3/4" IT
• Connections to the solar pipes: 3/4" IT
• Maximum pressure: max. 6 bar
• Medium: Water with max. 50 % propylene glycol
• Dimensions: approx. 430 x 223 x 193 mm (with insulation)
• distance centres: 100 mm
• distance centre/wall: 67 mm

• Fittings: brass
• Sealings: EPDM/AFM 34
• Insulation: EPP foam
• Maximum operation temperature: +95 °C
• Non-return valve: 200 mm head, openable
• Maximum temperature: +120 °C